Are you into making your own arts, crafts, and even tools? Maybe you want to try making your own knife, in which case you will need some good epoxy resin. Today we want to help you find the best epoxy for knife making, so let’s get right to it!
Comparison Table
| IMAGE | PRODUCT | |
|---|---|---|
EDITOR'S CHOICE  |
1. AeroMarine 300/21 Epoxy Resin 3 Gallon Kit
|
Check Price |
RUNNER UP  |
2. West System 650-8 G/Flex Toughened, Versatile, Liquid Epoxy Resin
|
Check Price |
Best Epoxy For Knife Making: Reviews
1. AeroMarine 300/21 Epoxy Resin 3 Gallon Kit
If you need good epoxy resin for knife making, this AeroMarine 300/21 Epoxy Resin is a really good option to keep in mind. What is nice about this stuff is that you get a massive amount of it, 3 full gallons, but keep in mind that it is quite expensive.
However, with that being said, you get what you pay for, and here you do pay quite a bit, but the quality of the product is really high. Let’s take a closer look at this AeroMarine 300/21 Epoxy Resin.
Review
One of the beneficial aspects of this AeroMarine 300/21 Epoxy Resin is the fact that it has a very low viscosity. Using an epoxy resin that is too thin and always runs off whatever you put it on is not ideal for something like knife making. You need the epoxy resin to stay in place while you put the other components together and as you wait for it to dry, which is exactly what this AeroMarine 300/21 Epoxy Resin excels at.
Due to the fact that it is so thick, it always stays in place where you put it. Moreover, this makes it really easy to manipulate with small tools to get it where you need it to go.
Speaking of manipulation, AeroMarine 300/21 Epoxy Resin comes with small applicators or syringes which makes applying this epoxy resin very easy, fast, and accurate. Something else that needs to be mentioned is that it is very strong and durable once dry.
This stuff is able to withstand heat, cold, sunlight, moisture, and all kinds of chemicals. As the AeroMarine 300/21 Epoxy Resin dries and forms a bond, removing it is more or less totally impossible by any means.
Yet another thing that you might like about this AeroMarine 300/21 Epoxy Resin is that it is a clear-gloss epoxy resin. This means that yes, it goes on a dark yellowish color, which is ideal so you can see where you have applied the glue, but it does dry clear and glossy.
It’s a good option because it does not make a visible mess, and you can then paint or gloss over it as you see fit.
What you might also like here is that if you need to apply multiple coats of AeroMarine 300/21 Epoxy Resin, it does not need to be cleaned or brushed in between applications. Simply apply one layer over the other with ease. Finally, AeroMarine 300/21 Epoxy Resin is designed to dry really quickly.
It comes complete with a special hardening agent that allows this stuff to dry extremely fast, so you can get back to making the other components of your new knife quickly. All in all, although AeroMarine 300/21 Epoxy Resin is very expensive for what it is, it is very durable, it forms a solid bond, almost nothing can loosen or break it, and it dries clear and quickly.
Pros
Cons
2. West System 650-8 G/Flex Toughened, Versatile, Liquid Epoxy Resin
Here we have another really good epoxy resin. Now, this stuff is much cheaper than what we just looked at, but it also has to do with quantity.
The previous epoxy we looked at came with 3 full gallons, whereas here you only get a small 4-ounce bottle of epoxy and a 4-ounce bottle of hardener. This is an ideal choice to go with if you just want to make a knife or two and don’t need massive bottles of epoxy resin.
It’s a great product and it does not cost very much either. Let’s take a closer look at this West System 650-8 G/Flex Epoxy Resin.
Review
Something that stands out about this West System 650-8 G/Flex Epoxy Resin is the fact that it can be used for all sorts of materials including vinyl, wood, plastic, metal, and more or less anything in between. This is therefore beneficial for knife making because often you might have a rubber handle and a metal blade, or a wooden handle, or various components made of differing materials.
With this West System 650-8 G/Flex Epoxy Resin, you can stick them all together without an issue. It’s designed for a variety of materials, making it perfect for creating and building your own knives.
What is also nice about this West System 650-8 G/Flex Epoxy Resin, is that it comes with the hardener included. All you have to do is mix the resin and the hardener together, then apply it to your knife materials and stick them together. The hardener is designed to make the West System 650-8 G/Flex Epoxy Resin dry extremely quickly and very hard. Once this stuff dries, thanks to the hardener, it becomes as hard as a rock and very durable.
Chipping away at this stuff once it is dry is nearly impossible, plus it is also highly resistant to moisture, heat and cold, UV rays, and chemicals too. It’s some really tough stuff that is not going anywhere once dry.
West System 650-8 G/Flex Epoxy Resin is very easy to apply. It comes with caps that are specially designed for easy and precise application.
Now, this stuff is pretty thick and easy to work with, and it won’t run all over the place, but it is a bit thinner than the above product we reviewed. With that being said, it is still more than thick enough to be easily manipulated and stay where it is supposed to stay, for the most part.
The other thing which you might like about this West System 650-8 G/Flex Epoxy Resin is that it goes on clear and dries clear, so once it is dry, you won’t be able to see it.
Pros
Cons
Conclusion
At the end of the day, both of these options are perfectly fine to go with when it comes to making knives. Of course, the first option we looked at was an industrial quantity, so best if you need a lot of epoxy, and the second option is better if you just want to make a couple knives.