More often than not, we sharpen dull knives at home using a sharpening stone. While this is something that works for regular, plain-edged knives, sharpening an electric knife is a tad bit different. Thus, today, we will talk about how to sharpen electric carving knives.
Before we can do that, though, we must first be aware of some basic knowledge about knives such as the reason why we need to sharpen them and knowing when it needs to be sharpened exactly. After all, if we understand how they work, then we can have a better chance of taking good care of them.
If you own a knife—whether it be electric or regular ones—there is no escaping knife sharpening. All knives become duller as you use them. For that reason, it is imperative that you sharpen them time and again to maintain its sharpness. However, that is not the only reason why you should do so.
A sharpened knife works better—there is no denying that. With sharp knives, you will need to put lesser force when cutting as compared to using dull knives. Consequently, this also means lesser damage to the food, especially when you deal with delicate ingredients like herbs.
Another reason why you should sharpen your knife is that they are much safer to use when sharp. Why? A sharp knife is predictable. You know it won’t slip when it strikes or when it is drawn across the food’s surface. As a result, you would have better control over the blade.
Lastly, sharpening is not as difficult as you think—neither does it consume too much time. Alternatively, you could also opt for professional knife sharpening services if you fear that you will just cause damage to the blade if you do it yourself.
While these may be expensive, they do a fantastic job in making sure that your knife performs at its best. The downside, however, is that it may take some time for the knife to be returned.
There are times when it gets tough to figure out whether your knife is dull or the food you are cutting into is the culprit. If you do not know the state of your blade, then how can you take care of it properly?
Luckily, you can do a simple test to make sure, and this test is fairly easy to do too. All you need is the knife in question (obviously) and a piece of paper. Here is how you can do it:
There are different ways with which you can sharpen your electric carving knives. Below, allow us to discuss each method briefly so that you can find out which technique suits your needs and preferences the most.
Using electric knife sharpeners are perhaps the easiest way to sharpen blunt knives. These devices come with abrasives that are on wheels and run with the help of an electric motor. As these wheels spin against the blade, it sharpens its edges in the process.
While the instructions for using one may be simple, it is best to follow the user manual. Generally speaking, though, once you switch the sharpener on, all you need to do is hold the knife down securely on the wheels. You have to make sure that you are doing so lightly, just enough to allow the machine to do its work.
Once you see it touching the wheels, you should very slowly and smoothly pull the blades through the slots. Do this for both sides of the blade to ensure a balanced sharp.
Electric sharpeners come in different makes and models. In fact, some even have a dedicated slot for very dull knives. A very dull knife would need at least 70 strokes on an electric knife sharpener to achieve a nice edge. Some sharpeners are also designed to narrow the angle of the blade.
The downside to using this machine, though, is that it cannot be used for knives that have a full bolster. Moreover, they can be quite costly as well, which leads us to another method of sharpening knives—using manual sharpeners.
While electric sharpeners are definitely the better choice, not everyone can afford to buy one. So, the next best option is to use a manual knife sharpener instead. Like electric ones, manual sharpeners have abrasives on wheels too, but they are not motorized. The abrasive can also be in a V-shaped chamber.
With a manual sharpener, you should also follow the manufacturer’s instructions. However, typically, what you need to do is put the knife through the chamber and carefully push and pull it while applying even pressure.
The upsides to using manual sharpeners are that the tall walls help in holding the knife steady and in place. Because of its small size, manual sharpeners can also be stored away in a drawer easily and quickly. Most importantly, they are extremely cheap and can be bought in just about any kitchen store.
On the other hand, it also poses its own set of setbacks. The most major issue that comes with using manual knife sharpeners is the fact that these are not meant to be used on knives that are extremely dull.
Own a blade but no tool to sharpen it? Well, you can actually use your coffee mug to do so! Simply flip the mug upside-down and use the unglazed bottom of the ceramic mug to sharpen the blade.
This method of sharpening dull knives is ideal for quick sharpening. Simply apply moderate pressure on the knife as you hold it at a 15-degree angle. Very carefully, draw the entire blade across the rough surface.
While this is typically meant for small knives, you can also do this to give large carving knives a quick sharpening. It will definitely not yield the same results as the previously mentioned methods, though.
So, now that you know how to sharpen electric carving knives, do you think you will do it yourself or hire a professional to do it? As you may have seen, it is not too hard to sharpen them; you just need the right equipment, and you are good to go!